Table of Contents
Advertisement
D-Guard² Instruction Manual
21.5 Reset Sensor Life
You can reset the D-Guard² estimated life of the fitted sensor. You must reset the
Sensor Life setting when a replacement sensor is fitted.
Access the Advanced Settings menu. See
Step 1. Use
to go into the advanced menu.
Step 3. Use
to go into reset sensor life.
Step 5. Use
to go back
NOTE: The D-Guard² calculates the life of the sensor by comparing the most recent
calibration data with the original stored calibration data.
NOTE: The Sensor Life value is for indication purposes only. It can be viewed on the
information screen.
45
section
21.1.
Step 2. Use
to highlight reset sensor life.
Step 4. Use
to reset sensor life.
Item Number 201018
Advertisement
Table of Contents
