Table of Contents
Advertisement
D-Guard² Instruction Manual
18.5 Set Suppression Band
The suppression band prevents the D-Guard² from displaying small changes in the
detected gas level close to zero. It is set to 1% of the full scale value and can be on or
off.
Access the Sensor Settings Menu. See
Step 1. Use
to exit or
Step 3. Use
to return to the settings menu.
29
section
to set suppression.
18.1.
Step 2. Use
to adjust then
Step 4. Use
to go back or
to apply.
continue.
Item Number 201018
Advertisement
Table of Contents
