Initial Appliance Configuration - HP ProCurve 800 Hardware Installation Manual

6. Initial Appliance Configuration

When you first power up the ProCurve NAC 800 appliance, you can use the
LCD menu and buttons on the front panel to set the IP address for the unit.
These same functions are available via the Console menu.
1. To access the Console Menu, connect a console and login to the ProCurve
NAC using the default administrator account:
Login = admin
Password = procurve
The Application Main Menu will display.
2. Select the Config menu, then the IP Address-Port 1 option.
3. Enter the following information:
• IP address you want to assign to the ProCurve NAC.
• Subnet Mask
• Default Gateway
4. When you have completed the configuration, you can exit the console
menu.
You can also use the console menu to access basic diagnostics (Ping Test), to
change the appliance (administrator) password, and to reset the unit.
The remaining configuration tasks for deploying the RADIUS server and
connecting the IDM Agent with the PCM/IDM server, are described in the
ProCurve NAC 800 Configuration Guide, available on the Web at
www.procurve.com.
Quick Install
Installing the Appliance
2-11