Included Parts - HP ProCurve 800 Hardware Installation Manual

Quick Install
Quick Install Summary
At this point, the unit is fully installed. See the rest of this chapter if you need
more detailed information on any of these installation steps.

Included Parts

The ProCurve NAC 800 appliance (J9065A) has the following components
shipped with it:
■
■
■
■
■
J a p a n P o w e r
C o r d W a r n i n g
For additional configuration information and user instructions, PDF versions
of the documentation for the ProCurve Network Access Controller 800 appli-
ance, including the Users' Guide, and this Installation Guide are available on
the Web at:
2-2
Console cable, DB-9 to RJ45 (5188-6699)
Accessory kit for ProCurve NAC 800 (5069-5705), which includes:
– two mounting brackets
– eight 8mm Machine Screws screws to attach the mounting brackets to
the unit
– four 5/8-inch number 12-24 screws to attach the unit to a rack
– four rubber feet for horizontal mounting on flat surface
ProCurve Network Access Controller 800 Hardware Installation Guide,
this manual (5998-3237).
Customer Support/Warranty booklet (5990-8862)
Power cord, one of the following:
Australia/New Zealand
China
Continental Europe
Denmark
India
Israel
Japan
Switzerland
South Africa
Taiwan
Thailand
United Kingdom/Hong Kong/
United States/Canada/Mexico
http://www.hp.com/rnd/support/manuals
8121-0838
8121-0910
8120-8861
8120-8930
8121-0780
8121-1035
8120-4753
8121-0908
8120-8929
8121-0974
8121-0673
8121-0909
8121-0921