Table of Contents
Advertisement
Product
Distribution amplifier
Document cameras
High resolution document imager
Motion presentation camera
You can purchase these accessories from your dealer, or by calling
EPSON at (800) 873-7766, or by visiting the EPSON Store at
www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Positioning the Projector
The location in which you choose to set up your projector depends on
the size of the room and your presentation style.
Place the projector on a sturdy, level surface, within this distance
I
from the screen:
3.3 to 36 feet in Wide mode
3.9 to 43.2 feet in Tele mode
(see page 29 for more information on these modes)
I
Make sure there is plenty of space for ventilation around and
under the projector.
I
Make sure the projector is within 6 feet of a grounded electrical
outlet or extension cord, and within 5 feet of your computer
and/or video source.
Place the projector directly in front of the center of the screen,
I
facing it toward the screen squarely. Otherwise, your image will
not be square.
Most presenters find it convenient to place the screen in the front of
the room with the projector back near the front of the audience,
leaving ample room between the screen and projector to get a
good-sized image. Then the presenter can stand in front of the room,
facing the audience and control the equipment from there.
Product number
ELPDA01
ELPDC02
ELPDC03
SM
note
It's best to position the screen
directly in front of the room.
If it's placed diagonally in a
corner, it's much more
difficult to aim the projector
at the screen correctly and get
a square image.
Setting Up the Projector
7
Advertisement
Table of Contents
