Setup Problems; Scanner Problems - Epson Perfection 610 Scanner Scanner Basics

Also see the documentation that came with your computer and printer for possible
solutions.

Setup Problems

If your system doesn't recognize the scanner . . .
Make sure your scanner is plugged in. If you opened your host application before
you plugged in your scanner, close your application and reopen it.
Check the USB cable connection or try using another USB cable.
If you get the message, "No push button scanner found," unplug your scanner,
shut down your computer, plug in your scanner, and then turn on your
computer.
Make sure you have selected the correct image source (

Scanner Problems

If the fluorescent lamp doesn't come on . . .
Make sure the power cord is connected to the scanner and plugged in to a power
outlet.
This may also be due to the power saving function (sleep mode); if the scanner
doesn't receive any commands after ten minutes, it turns off the lamp. The lamp
comes back on when you scan.
If the scanner doesn't scan your image . . .
Check your scanner source setting. Make sure you selected
Wait until the fluorescent lamp stays on (ready for scanning). You may need to
preview your scan to make the lamp come on.
If there is more than one USB hub in use, try connecting the scanner directly to
the computer's USB port. Use only the USB cable that came with your scanner.
).
EPSON TWAIN L
EPSON TWAIN L
.
55