Epson Perfection 610 Scanner Scanner Basics page 64

If the edges of the document are not scanned . . .
Check the position of your source document. Adjust
your document's position so that the image is within
the glass area.
Make sure your document is not too large for the
readable area.
If your scanned image is blurred or distorted . . .
Check the position and condition of your
document. Make sure the document is placed flat
against the scanner's document table glass. If only
part of the image is blurred, part of your document
may be wrinkled or warped.
Make sure the document table glass is clean.
Make sure the scanner is not tilted or placed on an
unstable or uneven surface.
59