Brake Adjustment; Base Lubrication Points - Stryker 1080 Maintenance Manual

BRAKE ADJUSTMENT

Required Tools:
3/32" Hex Allen Wrench
Pry Bar

BASE LUBRICATION POINTS

1. Lubricate brake adjuster rod
around areas shown at both ends
of the stretcher with MPG−2
grease or the equivalent.
Back to Table of Contents
Service Information
Do not grease
area shown.
13
Remove retaining plates, lift
the pump bar weldment and
grease the pump bar pivot
brackets.
Grease retaining plates where
they come in contact with the
pump bar before replacing them.