Figure 30 Location Of Handles On The 8010Co Chassis - Nortel Passport 8000 Series Installing And Maintaining

58 Chapter 3 Installing the 8010co Chassis

Figure 30 Location of handles on the 8010co chassis

Chassis
Handles
(x4)
8
Holding the 8010co Chassis in position, align the flanged end of the chassis
mounting rail with six holes on each side of the vertical rack support
(Figure
9
Make sure that the hole pairs on either side of the vertical support match
horizontally.
10 Tighten each screw with a Phillips screwdriver.
316314-D Rev 00
Fa il
Pa ss
32).
Fa il
Pa ss
10737FA