Incomplete Paper Feed - Canon LBP-1260 Service Manual

B. Incomplete Paper Feed
T - 1 1 Sheets stuck together
Paper
Envelope
2
cassette 3
4
Separation
5
Wrinkles
Possible cause Step
Print paper 1
2
3
Pick-up unit
Entrance 4
5
Check
being used'?
Dose the problem occur in the multl-
purpose tray7
Is the paper positioned correctly under
the hold-down tabs?
Does the problem disappear when the
spring for the separation pad Is
Check
Is the recommended paper being used?
Does the paper stop becomIng
tinkled when new paper is used?
Open the printer while a sheet of
paper is passing through the feeder
skewed?
Is the lower tMng roller dirty'?.
Result Procedure
NO Advise the user to only use
the recommended paper.
YES
sequent steu.
YES Check whether the hold-
down tabs are bent.
NO Load paper correctly.
YES Replace the separation pad.
YES Replace the spring.
NO Replace the sub-pad.
Procedure
Result
NO
Advise the user to only use
the recommended paper.
YES
to store the paper to preven
It becoming damp.
YES Check the pick-up unit.
YES Clean the guide.
YES Clean the roller.
NO Replace the Axing unit.