Table of Contents
Advertisement
Message
40
4 1
O F
FF
FONT FULL
2 - 5 0
Description
Line errclr
Data from the external device was not
interface (RS232C) was used.
Reference
pages before the page where the error
Print check request
A temporary error occured In a prlnted
Image. If this error occures, unwanted
horizontal lines appear in the printed
image.
The paper size selector of the universal
cassette Is not set correctly. me paper
size In the cassette is different.l
Envelope feeder instaIlatIon/removal
The envelope feeder was Installed or
removed when the power was turned ON
Font registration full
Since too many character sets are
registered in the printer, no more fonts
can be registered.
Perform the followlng
procedure until the error is
corrected.
resume data reception.
the interface cable between
the external device and the
he optimum conditions.
Remove the printed paper
from the tray. and press thq
ON LINE key to continue
printing. The page where t!
error occurred ts printed.
Set the paper size selector c
the universal cassette
correctly. Press the ON
LINE key to resume printlni
from the page in which the
Turn the power OFF and
ON again.
press the ON LINE key to
receive data from the
device. The font
registration of the character
set In which the error
occurred Is ignored. Remov
unnecessary fonts.
Advertisement
Table of Contents
