Table of Contents
Advertisement
B. Video Controller PCB
1) Perform step 1 to 5 on page 3- 18, and
remove the video controller unit.
Figure 3-49
If an ROM SIMM is installed, the SIMM
should be removed.
If the RAM SIMM is installed, the SIMM
41
should be removed.
5) Remove the four screws and video
controller PCB.
Screws
Video controller PCB
Figure 3-60
Note for assembly
If you removed the expansion ROM PCB or
RAM SIMM when you replaced the video
controller PCB, reinstall it on the new video
controller PCB.
3-19
Advertisement
Table of Contents
