Table of Contents
Advertisement
3.
Disassembly and reassembly
a.
Fixing roller heater
Release the six hooks holding the wire
cover to the fixing
screwdriver. Remove the wire cover.
Wire cover
Figure 3-37
connector, and remove the left fixing
Screws
flat-blade
Screw
5) Remove the two screws. and then the
Remove the two screws, and then the
Remove the fixing roller heater lead
from the connector..
Figure 3-39
right Uxing cover. Pull the fixing roller
heater carefully out of the upper roller.
Figure
3-15
Advertisement
Table of Contents
