Canon LBP-1260 Service Manual page 32

E. Printing the Self Tests
includes three self tests that allow you to confirm the printer's settings and check
This printer
printer operation. The three self tests are: Test
Follow these steps to print the Test Page:
1. Press the ON LINE key to set the printer off-line.
2.
Press the TEST/FONT key
by the PRINTING TEST message.
3.
When the page is complete, press ON LINE to set the printer on-line.
NOTE: You can continuously print the Self Test. To do so, press and hold the TEST/FONT key
for more than six seconds. The printer displays the CONT. SELF TEST message. To
stop the continuous Self Test. mess the CONTINUE kev.
Page, Printer
once. The
printer displays the SELF TEST message followed
Settings Page, and
PCL Font List.