Table of Contents
Advertisement
2. Unpacking and installing the cartri~e
Take the cartridge out of Its bag.
Hold the cartridge as shown in
Fig. 4-2 (page 4-5) and slowly rock
it 45" each way, five or six times.
to distribute the toner evenly.
surface. hold its top down with
one hand, and pull the tab out
the sealing tape.
Open the printer. hold the
cartridge in both hands, and
install it in the printer.
Close the printer.
3. Operation check
1
paper.
2
Plug the power cord in and
switch the printer ON. When the
READY indicator stops flashing.
the printer Is standing by:
Press the ON LINE key to set the
printer off-line. Then press the
SELECT key. The printer
displays the SELF TEST message
followed by the PRINTING TEST
message.
3
For safety, keep the area around
the printer clear
Check
Check
Check that the density of the
test print is light.
Remarks
See Figure 4-2.
Slowly insert it until it is
securely seated at each
end.
Remarks
Advertisement
Table of Contents
