Table of Contents
Advertisement
CHAPTER 4
If the boxed printer is brought into the warm from a cold storeroom or delivery truck, condense-
tion will form on the printer surfaces. This will cause various problems. such as print defects. To
prevent this from happening, make sure you leave the printer in its box to gradually warm up to
room temperature before unpacking It. This will take at least an hour.
1. Unpacking
Action
Open the box.
2
Take all the andllq parts and
the documentation out.
3
Lift off the styrofoam pads (right
and left). then lift lhe printer
out.
4
Take the printer out of its plastic
bag. Peel off the tape holding the
various components.
5
Take the cassette out and remove
cassette.
6
Open the printer and remove the
tape. the protective sheets. and
the spacer Inside the printer.
7
Remove the packing material
holding the transfer charging
roller.
8
Open the multi-purpose tray
and remove the protective
sheet.
9
Open the delivery cover and
remove two packing pieces
moving in direction of arrow.
Check
Check you have the following:
Power cord
l
. Cartridge
Manual
l
Check that no external damage
occurred during
transportation.
Remarks
Advertisement
Table of Contents
