Using The Network Mailbox - Gigaset N670 IP PRO Installation, Configuration And Operation

Using the network mailbox

The network mailbox accepts incoming calls made via the corresponding line (corresponding
VoIP phone number).
Prerequisites
In order to allow the user to listen voice messages stored one a network mailbox the following
settings are necessary:
On the VoIP PBX
¤
Set up a network mailbox for the VoIP connection that is to be assigned to the handset.
On the N670 IP PRO
¤
In the provider/PBX configuration activate the SIP SUBSCRIBE for Net-AM MWI option
¢
( page 21). A subscription is established for the purpose of receiving notifications about
new messages on the network mailbox.
¤
In the mobile devices configuration enter the Call number or SIP name (URI) and activate
the network mailbox in the Network mailbox configuration section (
¤
Optional: In the mobile devices configuration enable the Flashing LED (MWI) for network
mailbox option (
MWI light on the Message key.
Playing back messages on the handset
¤
Press and hold
or
¤
Press the Message key
or
¤
. . . use
Network Mailbox
Listen to announcement out loud:
¢
page 31). New messages on the network mailbox are indicated by the
(if key 1 has been assigned to the network mailbox)
. . . use
to select Answer Machine
OK
Press the handsfree key
Using a handset connected to an N670 IP PRO base
to select the network mailbox
OK
¢
page 30).
OK
Play Messages OK
69