First Steps; Setting The Language; Registering The Handset (Dect); Establishing A Connection To The Local Network - Gigaset Maxwell 10 Administration Manual

First steps

For information on unpacking and installing the device please refer to the Maxwell 10
Installation Guide.
Your device will start automatically as soon as it is connected to the mains power supply.
Please be aware that if the device is powered by PoE (Power over Ethernet) it is supplied with power
as soon as it is connected to an Ethernet switch with PoE-functionality.

Setting the language

¤
On the Start screen tap on
¤
Scroll down and select

Registering the handset (DECT)

If you use a DECT handset you need to register it at the phone.
¤
Install the handset as described in the Installation Guide and apply it to the cradle in order to
charge the battery.
¤
On the Start screen tap on
¤
Select DECT Tap on Register DECT Handset.
The registration process may take some time. If the reg-
istration is successful a message is output.

Establishing a connection to the local network

Your phone must be connected to the local network before it can connect to a phone system or the
Internet and before you can operate it from a PC. You can connect the phone to the local network via
Ethernet or WLAN.
Connecting via Ethernet
¤
Make sure that the phone's LAN port
Ethernet cable.
¤
On the Start screen tap on
¤
Select Ethernet Drag switch by Ethernet to
the right to switch on Ethernet function.
The network connection is established if the phone
has automatically been assigned an IP address from a
DHCP server in the network.
If your device is assigned a static IP address, your net-
work administrator must tell you the IP address of
your device. You then assign this address to your
phone manually.
to open the list of available apps. Select
Language & input Tap on Language Select your desired language.
to open the list of available apps. Select
is connected to an Ethernet switch/router by an
to open the list of available apps. Select
Settings.
Settings.
Register DECT Handset
Touch here to register DECT handset
Settings.
Settings
WIRELESS & NETWORKS
Ethernet
Wi-Fi
Bluetooth
First steps
ON
OFF
OFF
9