Figure 2-9: Dc Power Connector With A Screw Connection Type Terminal Block; Figure 2-10: Terminal Block With A Crimp Connection Type - AudioCodes Mediant 2000 Installation Manual

Fast Track Installation Guide

Figure 2-9: DC Power Connector with a Screw Connection Type Terminal Block

If you are using a terminal block with a crimp connection type take
these 3 steps:
1. Remove the DC adaptor (screw connection type) that is attached to the Mediant 2000 rear
panel.
2. Connect the two insulated wires to the correct DC power supply. Ensure that the connections
to the DC power supply maintain the correct polarity (refer to
3. Insert the terminal block to the DC inlet located on the Mediant 2000 .
2 screws for
connecting the
crimp terminal
block to the
Mediant 2000
rear panel
Version 4.4

Figure 2-10: Terminal Block with a Crimp Connection Type

13
2. Installing the Mediant 2000
Figure 2-10).
August 2004