Connection to CAN bus through D-Sub slot brackets, 9-pin
■
(in accordance with CiA® 303-1)
FPGA implementation of the CAN controller (SJA1000 compatible)
■
NXP PCA82C251 CAN transceiver
■
Voltage supply for external devices via CAN connection can be connected through
■
a solder jumper
Galvanic isolation up to 500 V per CAN connection
■
Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
■
Optional available: PC/104-ISA stack-through connector
■
1.2 System Requirements
PC/104-Plus computer with Operating system Windows® 11 (64 bit), 10 (32/64 bit) or
Linux (32/64-bit)
1.3 Scope of Supply
CAN interface PCAN-PC/104 Plus Quad
■
Two slot brackets with D-Sub connectors for the CAN bus
■
Downloads
Device drivers for Windows® 11 (64 bit), 10 (32/64 bit) and Linux (32/64-bit)
■
CAN monitor PCAN-View for Windows
■
Programming interface PCAN-Basic for developing applications with CAN
■
connection
Programming interfaces for standardized protocols from the automotive sector
■
1 Introduction
PCAN-PC/104 Plus Quad
User Manual 2.0.1
© 2022 PEAK-System Technik GmbH
5