Appendix C Quick Reference - Peak PCAN-PC/104 Plus Quad User Manual

Appendix C Quick Reference

Position of the card in the PC/104 computer
Jumper Signal
IDx ID Select
CLKx Clock Select
INTx Interrupt Select
Software/Hardware Installation under Windows
Download the device drivers installation package from our website
www.peak-system.com/quick/DL-Driver-E. Install the driver before you install the
CAN interface.
The new hardware is detected at the next Windows start and the driver is initialized.
Check the operational readiness. Open the Windows Start menu. Type Peak
Settings and press |Enter|. The window PEAK settings appears. The connected
CAN interface is displayed under CAN Hardware.
Getting Started under Windows
Run the CAN monitor PCAN-View from the Windows Start menu as a sample
application for accessing the CAN interface. For initialization of the CAN interface
select the desired CAN channel and CAN bit rate.
Appendix C Quick Reference
User Manual 2.0.1 © 2022 PEAK-System Technik GmbH
Position in the PC/104-Plus computer
1
0
0
0
PCAN-PC/104 Plus Quad
2 3
1 2
1 2
1 2
4
3
3
3
32