Table of Contents
Advertisement
Sending faxes using the speed-dial function
When a recipient fax number is registered on the product, you can send a fax by choosing
the desired recipient from the speed-dial list in the LCD panel. You can register up to 60
recipient fax numbers on the product.
Note:
Before using the speed dial function, you need to register recipient fax information in advance. For
details, see "For Speed dial" on page 226 or "Using the EPSON Speed Dial Utility (for Windows
only)" on page 224.
1. Make sure that the product is in Fax mode. If not, press the
Fax mode.
2. Place your original either on the document table or in the Auto Document Feeder. For
details, see "Setting Your Originals" on page 129.
3. Press the Speed Dial button on the control panel.
The registered recipient list appears in the LCD panel.
4. Press the u Up or d Down button several times until your desired recipient is selected,
then press the r Right button.
The selected recipient appears in the second top row in the LCD panel.
Note:
❏ You can also select a recipient by entering the number directly.
❏ To display the details of the assigned recipient, press the Advanced/Menu button while the
recipient is selected. To return to the list again, press either the Advanced/Menu button or
the l Left button.
5. Make the appropriate settings for your scanning purpose if necessary.
You can specify the Document Size, Density, Image Quality, Polling receptions, and
Overseas transmission mode settings. For details, see "Selecting the appropriate
settings" on page 216.
Fax button to enter the
Faxing (Fax Model Only)
210
Advertisement
Table of Contents
