Table of Contents
Advertisement
❏ To select your scan area, click the
marks the edges of your image area. You can move the marquee to change the
scan area. See "Adjusting the Scan Area (Marquee)" on page 151 for instructions.
Note:
If you are going to scan at a different size than your original, you must first select your
Target Size and automatically create a marquee that is proportioned to that size. See
"Selecting the Scan Size" on page 155 for instructions. You can then copy the marquee and
place it on each image you will scan at that size.
❏ To zoom in on an image, click inside the scan area and click the Zoom button.
Epson Scan prescans again and displays a larger preview on the Zoom tab. (Your
other images are still previewed at the original size on the Preview tab.)
❏ To adjust the image quality, click the image(s) you want to modify and make the
adjustments as described in "Adjusting the Color and Other Image Settings" on
page 153.
4. When you have finished adjusting the scan area, and modifying the color and image
settings, you can select the size of your scanned image, if you have not already
selected it. See "Selecting the Scan Size" on page 155 for instructions.
Adjusting the Scan Area (Marquee)
A marquee is a moving dotted line that appears on the edges of your preview image to
indicate the scan area.
You can move the marquee, adjust its size, and create multiple marquees on one image
(full-size preview only) to scan different image areas in separate scan files. Follow these
steps.
1. To draw a marquee, move your cursor over a preview image. The pointer becomes a
set of cross-hairs.
auto locate icon to place a marquee that
151
Scanning
Advertisement
Table of Contents
