Epson Aculaser CX21N Series User Manual page 285

Caution:
c
❏ Do not touch the belt on the top of the unit or the blue photoconductor area.
Otherwise, the print quality may decrease.
❏ When replacing the photoconductor unit, avoid exposing it to light any longer than
necessary.
8. Hold the photoconductor unit by its handle, and insert the unit until it clicks shut while
aligning the arrow marks on the product.
Caution:
c
Do not touch the parts inside the product.
9. Push the yellow lever down, and then close cover B.
Replacing Consumable Products
285