Receiving Faxes Using Fax Polling; Making Changes To Fax Settings; Selecting The Appropriate Settings; Document Size - Epson Aculaser CX21N Series User Manual

Note:
To use this function, your product needs to have an attached phone, and Incoming Mode in
Reception Settings needs to be set to Auto switching. For details, see "Making Changes to Fax
Settings" on page 216.
1. Answer the incoming call using the attached phone.
2. Press the x B&W Start or x Color Start button after confirming the fax tone.
The received data are printed by page as they are received.

Receiving faxes using fax polling

This function is used to get the information stored in the other party's fax machine to your
product.
1. Make sure that the product is in Fax mode. If not, press the
Fax mode.
2. Enter the other party's fax number using the numeric keypad.
3. Press the u Up or d Down button several times until Polling Rcptn appears, then
press the l Left or r Right button to select On.
4. Press the x B&W Start or x Color Start button to start the transmission.

Making Changes to Fax Settings

Selecting the appropriate settings

You can change the following settings for transmitting or receiving faxes with the
appropriate settings.

Document size

You can specify the document size from A4, Letter, and Legal.
Note:
Legal size documents are available only with the Auto Document Feeder.
1. Make sure that the product is in Fax mode. If not, press the
Fax mode.
Fax button to enter the
Fax button to enter the
Faxing (Fax Model Only)
216