Canceling scanning
When you press the y Cancel button on the control panel, a scanning job in Scan mode is
canceled or the TWAIN processing is stopped.
Canceling copying
When you press the y Cancel button while scanning in Copy mode, the LCD panel shows
Cancel Print Job and the copy job is canceled.
Canceling faxing
Using the Cancel button
When you press the y Cancel button while scanning in Fax mode, the LCD panel shows
Cancel Print Job and the fax job is canceled.
Using the Fax Settings menu
This function is used to cancel the fax transmission job stored in the memory.
1. Make sure that the product is in Fax mode. If not, press the
Fax mode.
2. Press the Advanced/Menu button.
3. Press the d Down button to select Fax Job Information, and then press the r Right
button.
4. Press the d Down button to select Fax Transmission Job, and then press the r Right
button.
The FAX Transmission Job list is displayed.
Note:
To cancel the receiving fax job stored in the memory, press the u Up or d Down button several
times until FAX Reception Job is selected and press the r Right button. Then select the
incoming fax you want to cancel from the FAX Reception Job list.
5. Press the u Up or d Down button to select the fax job you want to cancel, and then
press the
Reset button.
6. Press the u Up or d Down button to select Yes for confirmation, and then press the
r Right button
Fax button to enter the
Using the Control Panel
257