Epson Aculaser CX21N Series User Manual page 88

5. Click the computer or server that is connected to the shared printer, and the name of
the shared printer, then click OK.
Note:
The name of the shared printer may be changed by the computer or server that is connected to
the shared printer. To make sure of the name of the shared printer, ask the administrator of the
network.
6. Click Next.
Note:
❏ If the printer driver is installed in the client beforehand, you need to select the new printer
driver or the current printer driver. When the prompt to select the printer driver appears,
select the printer driver according to the message.
❏ If the print server's OS is Windows Me or 98 or the additional driver for Windows Me or 98
is installed in the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server,
go to the next step.
❏ If the additional driver for Windows Me or 98 is not installed in the Windows XP, XP x64,
2000, Server 2003, or Server 2003 x64 print server, go to "Installing the printer driver from
the CD-ROM" on page 91.
7. Make sure of the name of the shared printer, then select whether to use the printer as
the default printer or not. Click Next, then follow the on-screen instructions.
Note:
You can change the shared printer's name so that it appears only on the client computer.
With Windows XP, XP x64, or 2000
Follow the steps below to set Windows XP, XP x64, or 2000 clients.
You can install the printer driver for the shared printer, if you have Power Users or more
powerful access rights even if you are not the Administrator.
Using the Printer Software with Windows
88