Sending Faxes Using Speed Dial/Group Dial - Epson WorkForce Pro WP-4500 Series User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545
D
Use the keys on the numeric keypad to enter the fax number, and then press OK. You can enter up to a
maximum of 64 digits.
Note:
❏ To separate phone numbers, enter a space by pressing
❏ To display the last fax number you used, press Redial.
❏ Press x Menu and select Send Settings to change the settings.
E
Press one of the x Start buttons to start sending.
Note:
If the fax number is busy or there is some problem, this product redials after one minute. Press Redial to redial immediately.
For WP-4521/WP-4525/WP-4530/WP-4531/WP-4535:
Use the l, r, u, or d buttons to change the LCD screen view to find the menu, setting item, or option you want to
enter.
A
Place your original in the Automatic Document Feeder or on the document glass.
"Placing Originals" on page 33
&
B
Enter K Fax mode.
C
Use the keys on the numeric keypad to enter the fax number. You can enter up to a maximum of 64 digits.
Note:
❏ To separate phone numbers, enter a space by pressing r.
❏ To display the last fax number you used, press
❏ Press x Menu and select Send Settings to change the settings.
D
Press one of the x Start buttons to start sending.
Note:
If the fax number is busy or there is some problem, this product redials after one minute. Press
immediately.

Sending faxes using speed dial/group dial

You can add speed dial entries to a group, allowing you to send a fax to multiple recipients at the same time. Up to 60
combined speed dial and group dial entries can be entered.
Follow the instructions below to send faxes using speed dial/group dial. Use the l, r, u, or d buttons to change the
LCD screen view to find the menu, setting item, or option you want to enter.
User's Guide
Faxing
.
Redial/Pause.
105
Redial/Pause to redial