Error Messages - Epson WorkForce Pro WP-4500 Series User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545
Menu
Group Dial Setup
Send Fax Later
Broadcast Fax
Polling
Fax Report
Maintenance
Problem Solver

Error Messages

This section describes the meaning of messages displayed on the LCD screen.
Error Messages
Paper out or Paper jam
No paper source matches paper size setting. Load XXX
paper in YYY. Press x or x.
No paper source matches paper size setting. Load
appropriate paper in YYY. Press x or x.
A printer error has occurred. Turn power off and then on
again. For details, see your documentation.
Printer error. Turn power off and then on again. For details,
see your documentation.
Using the Control Panel
Setting item
Create
Edit
Delete
-
-
-
Fax Log
Last Transmission
Speed Dial List
Group Dial List
Reprint Faxes
Protocol Trace
Nozzle Check
Head Cleaning
Head Alignment
User's Guide
Description
& See "Setting up group dial entries" on page 101
& See "Sending a fax at a specified time" on
page 108
& See "Sending faxes by broadcasting" on page 106
& See "Receive a fax by polling" on page 111
Prints or displays the communication log.
Prints a communication-in log for the previous
transmission or the previous polling results received.
Prints the speed dial list.
Prints the group dial list.
Reprints from the latest fax received. When the
memory is full, the oldest faxes are erased first.
Prints the protocol for the latest communication.
Solutions
& See "The Paper Jams" on page 154
& See "Loading Paper" on page 25
Turn the printer off and then back on. Make sure that no paper is
still in the printer. If the error message still appears, contact Epson
support.
122