Summary of Contents for Epson WorkForce Pro WP-4022
Page 1
WorkForce Pro WP-4022 ® Install ink cartridges Start Here Caution: Keep ink cartridges out of the reach of children and don’t drink the ink. Read these instructions before using your printer. O pen the front cover. Unpack Unpack the four ink cartridges. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. S hake each cartridge as shown for about 5 seconds. Remove all tape and protective materials, including the foam and plastic inside the printer. I nstall each cartridge in the correct slot for its color. Push each cartridge in until it clicks. C lose the front cover. Turn on C onnect the power cord to the back of the printer and to an electrical outlet. The printer starts priming the ink. This takes about 12 minutes. When the green power light stops flashing, priming is complete. ote: The included cartridges prime the printer and print about 1000 black pages/900 color pages. Actual page count will vary.
Page 2
Guide. P ull out the paper cassette. G ently insert the paper cassette. S lide the edge guides outward, and position them for the type of paper you are using. ote: The paper may slide forward slightly as you insert the cassette. This is normal. E xtend the output tray and raise the paper stopper as shown. (Do not raise the stopper for legal-size paper.) ote: If you are loading legal-size paper, extend the cassette as shown. Install software I nsert the paper with the glossy or printable side facedown. Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website (see “Epson technical support”). Caution: Be sure to close your other programs, including any screen savers and virus protection software, before beginning the software installation. M ake sure the printer is NOT CONNECTED to your computer. ote: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette. W indows : If you see a Found New Hardware screen, click ® Cancel and disconnect the USB cable. You can’t install your software that way. Insert your product CD.
Page 3
Any problems? W indows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. Network setup and printing problems • If you’re connecting the printer via Wi-Fi Protected Setup M ac OS X: Double-click the Epson icon. (WPS), make sure you press and hold the Wi-Fi button on the printer within 2 minutes of pressing the WPS button on S elect your language, if necessary. your router. Press and hold the Wi-Fi button on the printer for 3 seconds. C lick Install (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. • Try connecting to the router or access point with your computer or another device to confirm that it is working correctly. • Try resetting the router (turn it off and then on), then try to connect to it again. • Press the button to print a network status sheet. Verify that the network settings are correct and check the signal strength. If it’s poor, try moving the printer closer to your router or access point. Avoid placing the printer next to a W hen you see the Select Your Connection screen, check microwave oven, 2.4 GHz cordless phone, or large metal...
Page 4
Printer error. Turn the printer off and check for jammed paper. Make sure you remove the protective foam and plastic from inside the printer. Then turn the printer back on. If the error does not WorkForce Pro WP-4022 ink cartridges clear, contact Epson. Color Standard-capacity High-capacity Wi-Fi connection error.
Need help?
Do you have a question about the WorkForce Pro WP-4022 and is the answer not in the manual?
Questions and answers