Cleaning The Interior Of The Printer; Transporting The Printer - Epson WorkForce Pro WP-4500 Series User Manual

WP-4511/4515/4521/4525/4530/4531/4535/4540/4545
❏ Be careful not to scratch or damage the surface of the document glass, and do not use a hard or abrasive brush to
clean it. A damaged glass surface can decrease the scan quality.
Note only for printers without fax function:
Close the rear MP tray and the output tray when you are not using the printer to protect the printer from dust.

Cleaning the interior of the printer

To keep your print results at their best, clean the roller inside by using the following procedure.
Warning:
w
Be careful not to touch the parts inside the printer.
Caution:
c
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the printer with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is
needed.
A
Make sure that no warnings or errors are displayed on the LCD screen.
B
Load several sheets of A4-size plain paper.
C
Press r Copy.
D
Press one of the x Start buttons to make a copy without placing a document on the document glass.
E
Repeat step 4 until the paper is not smeared with ink.

Transporting the Printer

If you move the printer some distance, you need to prepare it for transportation in its original box or one of a similar
size.
Caution:
c
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise
ink may leak.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the printer
from printing.
User's Guide
Maintaining Your Printer and Software
144