Advertisement
WorkForce
Pro WP-4092
®
Start Here
Read these instructions before using your printer.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2
Turn on
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to a computer yet.
2
Press the
power button.
3
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and don't
drink the ink.
1
Open the front cover.
2
Unpack the four ink cartridges.
3
Shake each cartridge as shown for about 5 seconds.
4
Install each cartridge in the correct slot for its color.
Push each cartridge in until it clicks.
5
Close the front cover.
The printer starts priming the ink. This takes about 12
minutes. When the green
priming is complete.
Note:
The included cartridges prime the printer and print about 1000
black pages/900 color pages. Actual page count may vary.
Caution:
Don't turn off the printer or open the cover while it is
priming or you'll waste ink.
power light stops flashing,
Advertisement
Related Manuals for Epson WorkForce Pro WP-4092
Summary of Contents for Epson WorkForce Pro WP-4092
-
Page 1: Install Ink Cartridges
WorkForce Pro WP-4092 ® Install ink cartridges Start Here Caution: Keep ink cartridges out of the reach of children and don’t drink the ink. Read these instructions before using your printer. Open the front cover. Unpack Unpack the four ink cartridges. Caution: Do not open ink cartridge packages until you are ready to install the ink. -
Page 2: Install Software
If you want to install multiple drivers, repeat the software installation process as necessary. For more information, see your online User’s Guide. If you want to install Epson drivers, follow the steps below. Note: Make sure the paper is loaded against the front edge... -
Page 3: Printing Problems
Flashing fast Paper is out, paper size doesn’t match, or multiple sheets have fed at the same time. Load paper Mac OS X: The standard Epson driver installs correctly and press the paper feed button. automatically. If you want to install the PostScript driver, Paper is jammed in the cassette, the duplexer, or go to global.latin.epson.com/workforcepro. -
Page 4: Epson Technical Support
Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.