Technical Data; Safety Regulations And Accident Prevention - Gaspardo PA1 Use And Maintenance

ENGLISH

1.4 TECHNICAL DATA

The technical data and the models provided must be considered
as non binding. We reserve the right to change them without
notice.
1 2
4 5
7 8
24
USE AND MAINTENANCE
1.5 HANDLING
If the machine is handled, it must be lifted by hooking onto the
appropriate holes with a suitable winch or crane of sufficient
capacity. Because of the danger involved, this operation should
be carried out by trained and responsible personnel. The mass
of the machine is on the identification Plate.
Stretch the rope to keep the machine level.
The hook points can be detected by finding the «hook» symbol.
1.7 DANGER AND INDICATOR SIGNALS
The signs described in fig. 1 are reproduced on the machine.
keep them clean and replace them if they should come off or
become illegible. Carefully read each description and learn their
meanings by heart.
1) Before operating, carefully read the instruction booklet.
2) Before carrying out maintenance, stop the machine and
3) Danger of getting squashed during opening. Keep at a safe
4) Danger of getting hooked by the Cardanshaft. Keep away
5) Danger of falling. Do not get onto the machine.
6) Danger of getting trapped. Keep away from moving parts.
3
7) Danger of getting squashed during closure. Keep at a safe
8) High noise level. Use adequate acoustic protection.
9) Coupling point for lifting (indicating the maximun capacity).
10) Greasing point.
2.0 SAFETY REGULATIONS AND ACCIDENT
PREVENTION
Pay attention to danger signs, where shown, in this
booklet.
6
There are three levels of danger signs:
DANGER: This sign warns that the operations described cause
serious lesions, death or long term health risks, if they are not
carried out correctly.
ATTENTION: This sign warns that the operations described could
9
cause serious lesions, death or long term health risks, if they are
not carried out correctly.
CAUTION: This sign warns that the operations described could
cause serious damage to the machine. if they are not carried
out correctly.
10
fig. 1
g
consult the instruction booklet.
distance from the machine.
from moving parts.
distance from the machine.
cod. 19501320