Product Specification; Use - HOFFEN ATC710 Instruction Manual

Before use:
• Make sure that all packaging elements are disposed of with care.
• The device should be clean and dry and the cord should be completely unwound.
• Your hair should be clean, dry, and combed out. Do not use hair spray or other
flammable hair chemicals.
Using the device:
1. Charge the device fully before first use.
2. Set temperature to setting 1 (150°C/300°F). The default heating time is 12 seconds.
3. Start curling your hair. Place a strand of hair inside the hair curler and hold the rotation
button for 9 seconds in order for the hair to rotate inside the curler correctly. A countdown
with sound signals will start. After the first sound signal, you can release the rotation button.
4. Remove the hair and insert another strand.
5. You can set different heat levels and hair curling times.
6. If you hold the "setting button", the temperature indicator will start to blink. If you tap the
"setting button", you will be able to change the temperature unit from °C to °F.
7. If you hold the "setting button", the clock will start to blink. If you tap the "setting button",
you will be able to set the time from 8 to 18 seconds.
8. The hair curler remembers the most recent setting.
Warning:
1. Temperature: 150°C/170°C/190°C/200°C lub 300°F/340°F/370°F/390°F
2. Clock: 8 s, 10 s, 12 s, 16 s, 18 s
3. If the temperature setting is changed, please wait 5 seconds to heat up the hair curler.
4. Keep your hair from sticking to the curler during the curling process. Use on dry hair
only. Make sure that your hair is combed out well before curling. Use hair strands with
maximum width of 8 mm

6. PRODUCT SPECIFICATION

7. USE

1. LCD
2. Temperature dial
3. USB C charging port
4. Heating tube
5. Turn left
6. Turn right
7. LCD
8. Setting switch
9. ON/OFF switch
19