Connect Traditional Architecture System To The Direct Replacement Probe - Emerson Rosemount 6888C Manual

Manual
00809-0100-4891
Figure 4-10: Traditional architecture with direct replacement hazardous area replacement
probe (no electronics inside)
NOTICE
A. See Rosemount 6888 Xi Instruction Manual for additional installation and operating instructions.
B. All wiring marked with an asterisk (*) is factory wiring inside the Rosemount 6888 Xi.
C. Except for JP5, JP7, and JP8 on the input/output (IO) board, jumper and switch settings are factory set and are
shown for reference only.
4.9 Connect traditional architecture system to
the direct replacement probe
Use a traditional architecture configuration to provide for remote location of the
analyzer electronics. All electronics are housed inside the Rosemount 6888Xi. A
multi-conductor power/signal cable connects the probe to the Rosemount 6888Xi.
Manual
Install
January 2023
43