Configuration Control - Siemens SIMATIC ET 200MP Manual

Requirement
In order to generate a diagnostics, the IM 155-5 PN ST interface module must have been
configured once.
See also
Diagnostic alarms (Page 35)
4.2.2

Configuration control

"Configuration control" parameter
You can use this parameter to enable the configuration control function in the ET 200MP
distributed I/O system.
Note
If you configure the enable, the ET 200MP distributed I/O system requires a control data
record 196 from the user program in order for the ET 200MP distributed I/O system to
operate the I/O modules.
Reference
You can find more information on the control data record in chapter Configuration control
(option handling) (Page 20) and in the STEP 7 online help.
IM 155-5 PN ST interface module (6ES7155-5AA00-0AB0)
Manual, 08/2013, A5E03612323-02
Parameter
4.2 Description of parameters
19