Siemens SIMATIC ET 200MP Manual page 21

Control data record
A control data record 196 is defined for the configuration control that receives a slot
assignment.
Table 4- 3
Byte
0
1
2
3
4
5
:
4 + (max. slot - 1)
Control element
Each element must include the following information about the slot:
● Assignment of configured slot ⇔ real slot
Table 4- 4
Byte
Assignment of configured slot
(e.g. in byte 5)
IM 155-5 PN ST interface module (6ES7155-5AA00-0AB0)
Manual, 08/2013, A5E03612323-02
Control data record
Element
Block length
Block ID
Version
Version
Assignment of
configured slot 0
Assignment of
configured slot 2
:
Assignment of
configured maximum
slot
Code of control element
Bit
0 to 7
4.3 Configuration control (option handling)
Code
4 + number of slots
196
3
0
Real slot 0
Real slot 2
:
Real maximum slot
Meaning
01111111: Module not available
00000000 up to maximum slot: Real slot
Parameter
Explanation
Header
Control element
Describes in each
element which real
slot in the device is
assigned to the
configured slot.
21