Cleaning Evacuator Valve; Cleaning Air Conditioner Condenser Screen (Cab Model) - Kubota LX2610 Operator's Manual

PERIODIC SERVICE
2. When the coolant level drops due to evaporation,
add soft water only up to the full level.
In case of leakage, add antifreeze and soft water in
the specified mixing ratio up to the full level.
(See Flushing cooling system and changing coolant
on page 131.)
(1) Recovery tank
IMPORTANT :
• If the radiator cap has to be removed, follow
the caution above and securely retighten the
cap.
• Use clean and
antifreeze to fill the recovery tank.
• If coolant should leak, consult your local
KUBOTA Dealer.

7. Cleaning evacuator valve

Open the evacuator valve to get rid of large particles of
dust and dirt.
[LX3310]
(1) Evacuator valve
114
(A) [FULL]
(B) [LOW]
fresh soft water, and
[LX2610/LX2610SU]
(1) Evacuator valve
8. Cleaning air conditioner
condenser screen (CAB model)
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before removing the
screen.
• The condenser and receiver become hot while
the air conditioner is running. Before checking
or cleaning them, wait long enough until they
cool down.
1. Detach the air conditioner condenser screen and
remove all foreign materials.
(1) Air conditioner condenser
screen
IMPORTANT :
• Grill and screen must be clean from debris
to prevent engine from overheating and to
allow good air intake for air cleaner.
DAILY CHECK
(A) "DETACH"
LX2610,LX3310