ABB GLA451 User Manual page 44

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
For select analyzers, the
samples to the analyzer, using syringe injection. (Figure 27) See
page 100 for more information.
1. Click the Syringe Injection radio button
Plot Frequency
The radio buttons allow you to select between manually or automatically
plotting the data. (Figure 27)
To adjust the frequency:
1. Click the Rate button (clock icon) on the
Data Rate Control Adjustment
a. The
2. Click the Plot on Demand radio button to manually plot the data.
a. When selected, the
When Refresh Plot button is selected, current data is added to the
Panel
display.
3. Click the Plot every Nth fit radio button to automatically set the rate at which the
data is updated on the
a. For example, if you set the value to 5, a data point will be saved every 5
seconds.
4. Click Save.
Batch Injection System
Refresh Plot
Main Panel
display.
The analyzer restarts sampling at whatever rate was set last.
allows you to manually introduce individual
Batch Mode Operation
for Batch Mode Operation
User Interface Control Bar.
panel appears. (Figure 27)
button appears on the
on
.
(Figure 21)
Main Panel
display.
Main
44