USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
2. Select Batch Injection mode in the analyzer software:
a. Click the RATE button (clock icon) in the
107)
3. The
Operating Mode
a. Select either:
Syringe Injection
Syringe Injection (Dilution x10), if applicable
4. Click Save.
Figure 107: Click the Rate Button
pop-up menu displays. (Figure 108)
The sample will be diluted x10 by filling the cavity with zero air
o
before measurement.
Figure 108: Rate Selection Menu
User Interface Control Bar
. (Figure
109