Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Connect Analyzer to Local Network
1.
Unplug the black cable from the router
Figure 58: Unplug Cable and Remove Ethernet Union
2. Remove the Ethernet union (next to the router). (Figure 58)
3. Plug the black cable into either port of the Ethernet union. (Figure 59)
4. Plug the blue cable into the other port of the Ethernet union. (Figure 59)
5. Connect a local area network (LAN) cable from an external computer to the analyzer
Ethernet port, located on the external side panel.
Figure 59: Plug Cables into Ethernet Union
LAN/WAN
port. (Figure 58)
76
Advertisement
Table of Contents
