ABB GLA451 User Manual page 94

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
6. Use the arrow scroll bar to select the number of times to run the unknown gas
sequence for each reference gas sequence. (Figure 87)
7. Select Save Changes to save your current configuration.
8. To begin sampling, click Close. (Figure 87)
The MIU outlet port is:

Open when the MIU is powered on

Open at initialization

Open and closes as specified on the
properly initialized
While the MIU is operating, the current valve being sampled/referenced and its text
description is shown in the parameter window of the
88)
The description is:

Displayed on the parameter window of the
analysis. (Figure 88)

Saved to a data file
Figure 88: User Interface Control Bar (showing MIU information)
9. When sampling is complete, disable the MIU by returning to the
uncheck the MIU Enable check box. (Figure 87)
MIU tab
when the analyzer software has
User Interface Control Bar.
User Interface Control Bar
(Figure
during
MIU screen
, and
94