ABB GLA451 User Manual page 92

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Control the MIU Using the Analyzer Setup Panel
1. Click Setup on the
2. Click on the MIU tab at the top of the
MIU setup
a. The
are sampled and for how long.
Figure 86 shows the
Figure 86: Gas Manifold Control Screen for the MIU, not yet enabled
User Interface Control Bar.
Setup
menu becomes active. Use the menu to specify what ports
Gas Manifold Control Screen for the MIU not yet enabled.
(Figure 88)
menu selection bar. (Figure 86)
92