Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Set up VNC Software on iOS Devices
1.
On the iOS device, go to Settings > WiFi, then select the network from the list.
2. Connect to the wireless SSID network listed on the router sticker. (Figure 53) Enter
the TP-Link wireless router. (example: TP-LINK-775C)
For ultraportable analyzers, the TP-Link wireless router is installed
inside the analyzer and may be accessed by opening the case.
For all other analyzers, the optional TP-Link wireless router is attached
to the outside of the case.
3. Select your SSID network. For example, TP-LINK-D036. (Figure 66)
Enter Password
4. The
wireless password on the router sticker. (Figure 53)
5. Select Join.
Figure 66: Network Connections Screen
screen appears. (Figure 67) In the Password field, enter the
Figure 67: Router Connection Screen
81
Advertisement
Table of Contents
