Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Table 8 describes fault criteria for the Temperature Alarms.
Status
Sensor Read
10
Analyzer Temp
11
14
Analyzer Temp
17
Fault
19
Acceptable
20
Range
If the Alarm Status is Yellow or
on page 65. If issue continues, please contact
Table 8: Fault Criteria for Temperature Alarms
Fault Condition
Temperature High/Low
Alarm
CROSS OVER
Temperature High/Low
Warning
NaN reading
Dead Band
No warning/alarm
Red,
Description
The temperature exceeds the operating
temperature range.
The temperature is > the high warning
set point.
The temperature is < the low warning
set point.
Occurs when there is a false or
undefined value. (NaN= not a number)
No warning/alarm
please refer to the Maintenance section
Support@lgrinc.com.
38
Advertisement
Table of Contents
