Table of Contents
Advertisement
5. If the package contents are incomplete or damaged, or do not correspond to your order,
please immediately inform the responsible delivery company.
6. Make a note of the device's identification data.
SIMATIC FDE Gateway
Operating Instructions, 02/2023, A5E52308942-AB
WARNING
Risk of electric shock and fire due to device damage
A damaged device can carry dangerous voltage and trigger a fire in the machine or plant.
A damaged device has unpredictable properties and states.
Death or serious injury can be the result.
Ensure that the damaged device is not installed and commissioned unintentionally. Label
the damaged device correspondingly and keep it locked up. Send in the device so that it
can be repaired as soon as possible.
NOTICE
Damage caused by condensation
If the device is exposed to low temperatures or extreme fluctuations in temperature
(such as during cold weather) during transport, this may cause moisture to build up on
or in the device (condensation).
Moisture may cause a short-circuit and damage the device.
Proceed as follows to prevent damage to the device:
Store the device at a dry location.
Let the device warm up to room temperature before commissioning.
Do not expose the device to direct heat radiation from a heater.
If condensation occurs, wait about 12 hours or until the device is completely dry before
switching it on.
Installing and connecting a device
4.8 Preparing for the installation
17
Advertisement
Table of Contents
