Weinzierl KNX IP LineMaster 762.1 secure Operation And Installation Manual page 7

Settings that deviate from the parameterization are marked with a square bracket. The
parameterized setting can be restored with a long button press on button enter ❼.
"Rep / ACK" submenu
2.2.7
In this submenu the settings for repeating telegrams on the subline (TP) can be changed. The
settings for broadcast telegrams (BC), individual addressed telegrams (IA) and group telegrams
(GA) can be changed separately.
The following selections are available:
▪
No repetition: ---
▪
Up to 3 repetitions: REP
In addition, the settings for the telegram acknowledgement (acknowledge) on the subline (TP) can
be changed:
▪
Confirm only when routing: ROUT
▪
Always confirm: ACK
▪
Negative confirmation: NACK
If the response is NACK, access to the device via KNX TP is no longer possible, see ETS
parameter settings.
These settings are temporary.
Settings that deviate from the parameterization are marked with a square bracket. The
parameterized setting can be restored with a long button press on button enter ❼.
© 2022 WEINZIERL ENGINEERING GmbH Seite 7/38