Weinzierl KNX IP LineMaster 762.1 secure Operation And Installation Manual page 11

2.2.15 "System Info" menu item
Information about the device is displayed here:
▪
SerNo: Serial number
▪
Info: ManufacturerID.AppID.AppVersion
▪
State: State of the application
▪
Vers.: Firmware version
▪
MAC: MAC address
▪
QR Code: KNX Security initial key (FDSK)
2.2.16 "Dev Reset" menu item
In this menu, the device can be restarted with RESTART DEVICE or reset to factory settings with
MASTER RESET. After selecting an option, button enter
has finished and the option is executed.
After a master reset a new ETS download is required.
2.2.17 "Contrast" menu item
To adjust the contrast of the display, this menu item is selected in the main menu. By pressing
button enter ❼ several times, the contrast can be set to different levels.
© 2022 WEINZIERL ENGINEERING GmbH
❼ must be held down until the animation
Seite 11/38