Table of Contents
Advertisement
8.4.2
IP configuration
Under Properties menu item "IP", the IP specific options of the KNX IP LineMaster 762.1 secure
can be changed.
The change made will only take effect after an ETS download.
By switching from "Obtain an IP address automatically" (via DHCP) to "Use a static IP address"
(static IP address), the IP address, subnet mask and standard gateway can be freely selected.
IP Address
The IP address of the KNX IP LineMaster 762.1 secure must be entered here. This is used to
address the device via the IP network (Wi-Fi). The IP addressing should be coordinated with the
administrator of the network.
Subnet Mask
The subnet mask must be entered here. This mask is used by the device to determine whether a
communication partner is located in the local network. If a partner is not in the local network, the
device does not send the telegrams directly to the partner, but to the standard gateway, which
takes over the forwarding.
Default Gateway
Enter the IP address of the gateway here, e.g. the access point of the installation.
© 2022 WEINZIERL ENGINEERING GmbH
Seite 28/38
Advertisement
Table of Contents
