Table of Contents
Advertisement
▪
Manual: Parameterized coupler settings were overwritten manually via manual operation in
the device display (filter, retransmit and acknowledge). A long press on button enter
restores the normal operating mode as parameterized.
The power supply function (KNX – and auxiliary voltage) is independent of the state of the
application.
After 10 minutes of no activity, the device switches to the screen saver (blank screen
with a jumping dot) to increase the lifetime of the display. Pressing any key turns the
display back on.
2.2.2
Main menu
Pressing the button down
you call up the submenus. Within the menus, use buttons up
❼
button enter
to confirm and the button escape
The main menu offers the following menu items for selection:
▪
Router
▪
Powersupply
▪
System Info
▪
Dev Reset
▪
Contrast
"Router" menu item
2.2.3
The Router menu item offers the following submenus for selection:
▪
IP Config
▪
IP Tunnel
▪
Filter
▪
Operation
▪
Transit
▪
Bus Errors
© 2022 WEINZIERL ENGINEERING GmbH
❺
calls up the main menu of the device. By pressing button enter
❹
and down
❻
to go back or up one level.
❼
❼
❺
to navigate, the
Seite 5/38
Advertisement
Table of Contents
